|  Masonry
Flashing
Fiberweb 200, 300 and 310 Masonry Flashings are strong and
durable membranes which remain flexible at extreme temperatures.
They will not shrink or sag, and will resist accidental
punctures during installation.
|
|  Fiberweb
200-4102
A
black laminate comprised of polyester film, 20x10 fiberglass
scrim and a layer of vinyl film. FIBERWEB 200 is approved
by the Army Corps of Engineers under Guide Specification
CEGS-07600. Fiberweb 200 has a total average thickness of
8 mils.
|
Fiberweb
300-4103 and Fiberweb 310
A
foil laminate between layers of MylarŪ polyester with
fiberglass scrim reinforcement. FIBERWEB 300 and 310
have a total average thickness of 7 mils and 8 mils
respectively.
|
Fiberweb
Tape - 4100
FIBERWEB
tape is used to repair punctures in the flashing. Each
2" wide roll contains 108 linear feet. The tape
is made of the same material as the FIBERWEB flashing.
|
Aqua-Flash
500®
A composite sheet type waterproofing membrane consisting
of 8 mils of high density cross laminated polyethylene bonded
to 32 mils of rubberized asphalt for a total thickness of
40 mils. |
 Copper
Fabric Flashing
Highest quality laminated copper flashing on the market
today. Available in 2, 3, 5, or 7 oz. per square foot. Two
layers of dense glass fabric and special blended asphalt
are laminated to copper core to produce greater tensile
strength and improved puncture resistance. |
 Copper
Aqua-Flash®
A composite flexible flashing composed of a layer of polyester
film bonded to a solid sheet of soft tempered copper bonded
to 32 mils of a highly adhesive SBS modified bitumen (rubberized
asphalt) with a removable silicone coated liner. |
 Drip
Edge Flashing
Drip Edge Flashing, when used with Fiberweb products or
Aqua Flash 500, creates an effective moisture barrier. Type
304 stainless steel, 26 gauge. 3" wide by 8' sections.
Packaged 50 per box. |
 Terminator
Bar
Attaches flashing to back-up wall. Available in aluminum
and stainless steel finish. Flat aluminum 1/8" x 1"
wide by 10' sections with 3/8" slotted holes, 8"
O.C. 50 pieces per tube. Flat stainless bar 1/8" x
1" wide by 10' sections: holes 5/16", 16"O.C. |
