Truss Type Series 300
Truss design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry. Manufactured in 10 foot lengths from wire, it conforms to ASTM A 82 for cold drawn steel wire. It consists of two or more parallel and deformed longitudinal wires welded to a continuous diagonal cross wire at 16" o.c. Out-to-out spacing is approximately 2" less than the nominal thickness of the wall.

Prefabricated Corners and Tees
Corners and tees shall be used at all corners and intersections. Installation shall be in strict accordance with manufacturer's instructions. Specify inside or outside corners for cavity or composite walls. See page 2 for finishes and wire gauges.