WIRE-BOND

Series 200 (4 wire)

Ladder 4 Wire
Home / Products / ladder mesh reinforcement / Ladder 4 Wire
ladder mesh reinforcement
USA Flag

MADE IN THE USA

QUESTIONS?

Series 200 (4 wire) Ladder 4 Wire | Documents: 7

In Categories: 1

ladder mesh reinforcement: 9

Description

Ladder 4 Wire has 4 Side Rods to reinforce block and brick composite walls. Ladder Series 200 design is a prefabricated reinforcement for embedment in the horizontal mortar joints of masonry. It is manufactured in 10ft lengths from wire conforming to ASTM A1064/A1064M.

4 Wire consists of 4 parallel and deformed longitudinal wires welded to a perpendicular cross wire spaced 16" O.C. Out-to-out spacing is approximately two inches less than the nominal thickness of the wall.

Features
  • 16" O.C. ladder design positions cross rods on web of block to allow core clearance.
  • Simplifies rebar installation; centering utilizes strength of grout.
  • Allows unrestricted flow of grout or loose fill insulation into CMU cells.
  • Minimizes re-setting of joint reinforcement around rebar.
  • Improves resistance to shrinkage cracking.
  • Provides stronger bond with cross rods in web of block.
  • Less time devoted to rebar installation, grout pouring.
  • Meets ASCE/ACI 530 building code requirements for masonry structures and ASTM A 951 (standard specification for masonry joint reinforcing).
Dimensions
Wire Gauges Side Rods Cross Rods
Standard 9 gauge (.148 in) 9 gauge
Heavy Duty 3/16" (.187 in) 9 gauge
Extra Heavy Duty 3/16" (.187 in) 3/16"
FINISHES:
  • Mill Galvanized
  • Hot Dip Galvanized
  • Stainless Steel
QUESTIONS?
Home / Products / ladder mesh reinforcement / Ladder 4 Wire
WIRE-BOND

Copyright© 2026 WIRE-BOND All Rights Reserved · Privacy Policy

Products Videos

Corporate Office

400 Rountree Road

Charlotte, NC 28217

Tel: 800-849-6722

Memphis Plant

2365 Harbor Avenue

Memphis, TN 38113

Tel: 800-441-8359

Union NJ

675 Rahway Avenue

Union, NJ 07083

Tel: 800-849-6722