WIRE-BOND

4140

Copper Seal Flashing
Home / Products / products with installation instructions / Copper Seal Flashing
products with installation instructions
USA Flag

MADE IN THE USA

QUESTIONS?

4140 Copper Seal Flashing | Documents: 4

In Categories: 2

products with installation instructions: 14

Note: A Termination Bar is required for surface-mounted applications.

Description

Wire-Bond's Copper Seal copper fabric flashing is a full, single sheet of 3, 5, or 7oz. copper sheet bonded with a rubber based adhesive between two layers of polymer fabric.

Features

  • Works in all temperatures (-25°F-125°F).
  • Compatible with building envelope air barriers, spray foam insulations and rigid board insulations.
  • Clean and compatible - no asphalt or parting agents.
  • Made of 90% recycled copper.
  • Lighter weight allows longer 60-ft. rolls for fewer lap joints (40′ for 7oz).
  • Compatible with most caulks and sealants; no special flashing mastic needed, polyether sealants are recommended.

Dimensions

3 and 5 oz. 60 linear feet per roll
7 oz. 40 linear feet per roll
Available Lengths
12", 16", 18", 24", and 36"

Material:

Copper sheet bonded with a rubber based adhesive between two layers of polymer fabric.

Applications:

  • Foundation Sill Flashing
  • Cavity Wall Flashing
  • Parapet or Copings
  • Base flashing
  • Spandrel flashing
  • Head and sill flashing
QUESTIONS?
Home / Products / products with installation instructions / Copper Seal Flashing
WIRE-BOND

Copyright© 2026 WIRE-BOND All Rights Reserved · Privacy Policy

Products Videos

Corporate Office

400 Rountree Road

Charlotte, NC 28217

Tel: 800-849-6722

Memphis Plant

2365 Harbor Avenue

Memphis, TN 38113

Tel: 800-441-8359

Union NJ

675 Rahway Avenue

Union, NJ 07083

Tel: 800-849-6722