4520
SureTie Anchoring System-
Updated 1-½” diameter washer
-
Steel Stud Application
-
Steel Stud Application - No Insulation
#4520 SureTie Anchoring System | Documents: 16
| Type | View Document | ||
|---|---|---|---|
| submittal | Chuck Adapter | ||
| submittal | No Insulation | ||
| submittal | Seismic (Metal Clip) | ||
| submittal | Seismic (Plastic Clip) | ||
| submittal | Size Chart | ||
| submittal | SureTie | ||
| test | Thermal Performance Test Report | ||
| test | Sure Tie Pullout Test | ||
| sds | Sure Tie Fastener | ||
| sds | Stainless Steel | ||
| sds | Hot Dip Galvanized | ||
| sds | Bright Basic Wire | ||
| sds | Mill Galvanized Wire | ||
| leed | Sure Tie Fastener | ||
| leed | Sure Tie Triangle | ||
| installation | Installation |
In Categories: 5
products with installation instructions: 14
Independent full-scale wall testing confirms SureTie fasteners do not create any measurable thermal bridging within the wall system.
Description
The SureTie Anchoring System provides strong, reliable masonry tie connections while eliminating thermal bridging to maintain wall energy performance. Its wide slot design works with today’s diverse cavity wall configurations and delivers exceptional holding power, protection against air and moisture, and proven long-term durability valued by architects and masons.
SureTie allows positive contact with steel stud backup. Compression and tension loads in the veneer are transferred to the steel stud backup.
Sure Tie (#4520) quickly and accurately pierces insulation and/or wallboard to abut with steel studs in brick veneer applications.
The adjustable SureTie triangle (#4510) allows a maximum of 1-1/4″ vertical movement both up and down.
SureTie holds insulation in place, permitting contractors to install 4'x 8' sheets with ease, saving time and money.
Features
- Design permits no disengagement.
- Maximum clearance between connecting parts of the tie is 1/16″.
- High strength barrel and slotted head fabricated from carbon steel.
- Manufactured and tested in conformance with SAE J78 (self-drilling and self-tapping screws).
- One-piece design provides superior strength.
- 12-24 self driller (#4520).
- Accommodates Various thicknesses of insulation.
Dimensions
| Part | Length | Gauge |
|---|---|---|
| #4520 SureTie | Can accommodate up to 4-1/2" of insulation |
#12-24 self driller |
| #4510 SureTie Triangle |
3" 4" 5" 7" 9" |
3/16" dia. standard |
Finishes:
| Part | Finish |
|---|---|
| #4520 SureTie |
Ruspert® coating providing superior corrosion resistance. |
| #4510 SureTie Triangle | Hot Dip Galvanized Stainless Steel |
